Bi-weekly INTT Meeting
→
US/Eastern
Orange Room (Building 510)
Orange Room
Building 510
Description
To join the Meeting:
https://bluejeans.com/838995512
To join via Browser:
https://bluejeans.com/838995512/browser
To join with Lync:
https://bluejeans.com/838995512/lync
To join via Cisco Jabber Video:
https://bluejeans.com/838995512/jabber
To join via Room System:
Video Conferencing System: bjn.vc -or-199.48.152.152
Meeting ID : 838995512
To join via phone :
1) Dial:
+1.408.740.7256 (United States)
+1.888.240.2560 (US Toll Free)
+1.408.317.9253 (Alternate number)
(see all numbers - http://bluejeans.com/numbers)
2) Enter Conference ID : 838995512
Minutes for INTT meeting
June 23, 2017/06/24
Notetaker:I. Nakagawa
=== <Yorito>===
-Send out L0 design to Hamamatsu and Yamashita early next week to let them start the drawing
-L123 Prototypes are to be tested once their silicons are wire bonded
=== <Itaru> ===
-Should present the thermal simulation and measurement results using prototypes and the plan in the next INTT meeting
-Thermal simulation need to implement cooling points in both ends of the ladder <Hidekazu>
-Obtain 230um carbon fiber for actual measurement with high thermal conductive graphite sheet
-Optimize stave thickness by November
===<Takashi>===
-Start look for the option of finding company which has rolling type exposure machine.
-The prototype pattern is 3 lines width 150um separated by 150um intervals are to be made around center and left and right edges of a sheet to see the uniformity of the line quality.
-The connectors to be the candidate to be applicable to final design. To be consulted with Yanagwa-san.
-Ask Yanagawa-san to start drawing without waiting for the sample measurement.
-Search for the option which can achieves the minimum adhesive to reduce the permittivity.
June 23, 2017/06/24
Notetaker:I. Nakagawa
=== <Yorito>===
-Send out L0 design to Hamamatsu and Yamashita early next week to let them start the drawing
-L123 Prototypes are to be tested once their silicons are wire bonded
=== <Itaru> ===
-Should present the thermal simulation and measurement results using prototypes and the plan in the next INTT meeting
-Thermal simulation need to implement cooling points in both ends of the ladder <Hidekazu>
-Obtain 230um carbon fiber for actual measurement with high thermal conductive graphite sheet
-Optimize stave thickness by November
===<Takashi>===
-Start look for the option of finding company which has rolling type exposure machine.
-The prototype pattern is 3 lines width 150um separated by 150um intervals are to be made around center and left and right edges of a sheet to see the uniformity of the line quality.
-The connectors to be the candidate to be applicable to final design. To be consulted with Yanagwa-san.
-Ask Yanagawa-san to start drawing without waiting for the sample measurement.
-Search for the option which can achieves the minimum adhesive to reduce the permittivity.
There are minutes attached to this event.
Show them.