Barrel HCal Meeting
→
US/Eastern
Description
Murad Sarsour is inviting you to a scheduled ZoomGov meeting.
Topic: Epic Barrel HCal
Time: This is a recurring meeting Meet anytime
Join ZoomGov Meeting
Meeting ID: 161 050 1083
Passcode: 040716
---
One tap mobile
+16692545252,,1610501083#,,,,*040716# US (San Jose)
+16469641167,,1610501083#,,,,*040716# US (US Spanish Line)
---
Dial by your location
• +1 669 254 5252 US (San Jose)
• +1 646 964 1167 US (US Spanish Line)
• +1 646 828 7666 US (New York)
• +1 669 216 1590 US (San Jose)
• +1 415 449 4000 US (US Spanish Line)
• +1 551 285 1373 US (New Jersey)
Meeting ID: 161 050 1083
Passcode: 040716
Find your local number: https://bnl.zoomgov.com/u/abU0Cu5bD6
---
Join by SIP
---
Join by H.323
• 161.199.138.10 (US West)
• 161.199.136.10 (US East)
Meeting ID: 161 050 1083
Passcode: 040716
High Bay
- serial numbers and locations of tiles documented
- gateway up and running
- Martin suggests to leave as much of the hardware as possible in the HCal lab and use existing hardware from sPHENIX already in High Bay to set up second read-out station there; then once UCR folks bring their caloroc and KCU, we'll have a 2nd complete setup in the HCal Lab.
- Eric taking the lead in the move; he says the first step is paperwork (ESR)
Chimney modification (Dan Cacace)
- 3 sectors need to be modified for new chimney
- currently (sPHENIX) the same 3 sectors have a shortened (smaller outer radius) with special chimney tiles
- Dan's proposal is that this shortened section can be eliminated entirely (as in cut off)
- that means, we won't need to acquire special chimney tiles
- but will have to temorarily remove all tiles from those 3 sectors for modification of steel at vendor
- this means we'll have to acquire spare tiles in case any tiles get damaged in the removal process
There are minutes attached to this event.
Show them.